Hank Volatile Shearing Oil BS-301
This product is volatile punching and shearing oil, which is a kind of no-cleaning punching and shearing oil. It is made of highly refined volatile base oil and volatile antioxidants, lubricants and other additives. It is a process oil used in stamping of aluminum foil fins, punching, stretching, calendering and bending of copper pipes. It is suitable for processing of aluminum foil fins and copper parts in air conditioner radiators. It can replace and outperform the same type of volatile punching and shearing oil of Japan Idemitsu AF-2A and SHELL Corporation RF-190. BS-301 volatile punching and shearing oil meets the requirements of environmentally friendly food, and is also suitable for stamping and stretching processing of other aluminum foil aviation fast food boxes, aluminum foil containers, etc. in contact with food.
Performance characteristics:
Low-boiling base oil with good volatility and good annealing detergency
It has excellent lubricating properties and good forming ability for all copper and aluminum materials, and can obtain aluminum holes with large flanging heights
The patented formula has unparalleled advantages over other companies' products in terms of non-irritation to human skin
Completely odorless, maintaining a good workshop operating environment
BS-301 is suitable for stamping silicon steel sheets and galvanized sheets that require anti-rust requirements. The section has good anti-rust and does not affect annealing
Notes:
Oil should be stored in a cool and ventilated place, and sources of ignition are strictly prohibited.
Technical indicators:
| test project | BS-301 | BS-301S | detection method |
|---|---|---|---|
| appearance | Colorless transparent oily liquid | Dark brown transparent oily liquid | visual inspection |
| Viscosity (40 ° C, mm ²/s) | 1.0~1.2 | 1.2~1.3 | GB/T 265-88 |
| Flash point ℃ | ≥ 42 | ≥ 43 | GB/T 3536-83 |
| Corrosion test (100 ℃, 3h, aluminum, copper) | qualified | qualified | GB/T 5085 |
| Volatilization rate (min) | ≤15 | ≤25 | LNQS 7.3-A.13 |
| Maximum unstuck bite load (PB), N | > 490 | > 490 | GB/T 3142-82 |
Hank Volatile Shearing Oil BS-302
This product is volatile punching and shearing oil, which is a kind of no-cleaning punching and shearing oil. It is blended with highly refined volatile base oil and volatile antioxidants, lubricants and other additives. It is a process oil used in stamping of aluminum foil fins, punching, stretching, calendering and bending of copper tubes. It is suitable for processing of aluminum foil fins and copper parts in air conditioner radiators. It can replace the same type of volatile punching and shearing oil from Idemitsu AF-2C and SHELL Corporation RF-190. BS-302 volatile punching and shearing oil meets the requirements of environmentally friendly food, and is also suitable for stamping and stretching processing of other aluminum foil aviation fast food boxes, aluminum foil containers, etc. in contact with food.
Performance characteristics:
Low-boiling base oil with good volatility and good annealing detergency
It has excellent lubricating properties and good forming ability for all aluminum materials, and can obtain aluminum holes with large flanging heights
It has unparalleled advantages over other companies in terms of non-irritation to human skin
Completely odorless, maintaining a good workshop operating environment
BS-302 is suitable for stamping of sand steel sheets, galvanized sheets, etc. that require rust prevention, and does not affect annealing
BS-302 is less volatile than BS-301, but it has better lubrication and is suitable for processing thicker plates
Notes:
Oil should be stored in a cool and ventilated place, and sources of ignition are strictly prohibited.
Technical indicators:
| test project | BS-302 | BS-302S | detection method |
|---|---|---|---|
| appearance | Colorless transparent oily liquid | Dark brown transparent oily liquid | visual inspection |
| Viscosity (40 ° C, mm ²/s) | 1.4~1.6 | 1.5~1.7 | GB/T 265-88 |
| Flash point ℃ | ≥ 57 | ≥ 58 | GB/T 3536-83 |
| Corrosion test (100 ℃, 3h, aluminum, copper) | 1a | 1a | GB/T 5085 |
| Volatilization rate (min) | ≤30 (medium speed) | ≤45 (medium speed) | LNQS 7.3-A.13 |
| Maximum unstuck bite load (PB), N | > 680 | > 680 | GB/T 3142-82 |
Hank Volatile Shearing Oil BS-303
This product is volatile punching and shearing oil, which is a kind of no-cleaning punching and shearing oil. It is made of highly refined volatile base oil and volatile antioxidants, lubricants and other additives. It is a process oil used in stamping of aluminum foil fins, punching, stretching, calendering and bending of copper pipes. It is suitable for the processing of aluminum foil fins and copper parts in air conditioner radiators. It can replace the same type of volatile punching and shearing oil of Japan Idemitsu AF-3AS and SHELL Corporation RF-270. BS-303 volatile punching and shearing oil meets the requirements of environmentally friendly food, and is also suitable for stamping and stretching processing of other aluminum foil aviation fast food boxes, aluminum foil containers, etc. in contact with food.
Performance characteristics:
Low-boiling base oil with good volatility and good annealing detergency
It has excellent lubricating properties and good forming ability for all aluminum materials, and can obtain aluminum holes with large flanging heights
It has unparalleled advantages over other companies in terms of non-irritation to human skin
Completely odorless, maintaining a good workshop operating environment
BS-303 is suitable for stamping of sand steel sheets, galvanized sheets, etc. that require rust prevention, and does not affect annealing
BS-303 has slower volatility than BS-302, but it has better lubrication and is suitable for processing thick plates
Notes:
Oil should be stored in a cool and ventilated place, and sources of ignition are strictly prohibited.
Technical indicators:
| test project | BS-303 | BS-303S | detection method |
|---|---|---|---|
| appearance | Colorless transparent oily liquid | Dark brown transparent oily liquid | visual inspection |
| Viscosity (40 ° C, mm ²/s) | 2.0~2.2 | 2.1~2.3 | GB/T 265-88 |
| Flash point ℃ | ≥ 78 | ≥ 80 | GB/T 3536-83 |
| Corrosion test (100 ℃, 3h, aluminum, copper) | 1a | 1a | GB/T 5085 |
| Volatilization rate (min) | ≤60 (medium slow) | ≤75 (medium slow) | LNQS 7.3-A.13 |
| Maximum unstuck bite load (PB), N | > 780 | > 780 | GB/T 3142-82 |
Hank Volatile Shearing Oil BS-304/BS-304S
This product is volatile punching and shearing oil, which is a kind of no-cleaning punching and shearing oil. It is blended with highly refined volatile base oil and volatile antioxidants, lubricants and other additives. It is a process oil used in stamping of aluminum foil fins, punching, stretching, calendering and bending of copper tubes. It is suitable for the processing of aluminum foil fins and copper parts in air conditioner radiators. It can replace and be superior to the same type of volatile punching and shearing oil of SHELL company RF-270, etc. BS-304 volatile punching and shearing oil meets the requirements of environmentally friendly food, and is also suitable for stamping and stretching processing of other aluminum foil aviation fast food boxes, aluminum foil containers, etc. in contact with food.
Performance characteristics:
Low-boiling base oil with good volatility and good annealing detergency
It has excellent lubricating properties and good forming ability for all aluminum materials, and can obtain aluminum holes with large flanging heights
It has unparalleled advantages over other companies in terms of non-irritation to human skin
Completely odorless, maintaining a good workshop operating environment
BS-304S is suitable for stamping and drawing of silicon steel sheet, galvanized sheet and stainless steel sheet
BS-304 is less volatile than BS-303, but it has better lubrication and is suitable for processing thicker plates
Notes:
Oil should be stored in a cool and ventilated place, and sources of ignition are strictly prohibited.
Technical indicators:
| test project | BS-304 | BS-304S | detection method |
|---|---|---|---|
| appearance | Colorless transparent oily liquid | Dark brown transparent oily liquid | visual inspection |
| Viscosity (40 ° C, mm ²/s) | 2.7~2.8 | 2.8~2.9 | GB/T 265-88 |
| Flash point ℃ | ≥ 88 | ≥ 90 | GB/T 3536-83 |
| Corrosion test (100 ℃, 3h, aluminum, copper) | 1a | 1a | GB/T 5085 |
| volatility | (Slow speed) | (Slow speed) | LNQS 7.3-A.13 |
| Maximum unstuck bite load (PB), N | > 780 | > 780 | GB/T 3142-82 |
